Pārdod praktiski jaunu limiteru Dateq Spls 2 TS
Description
The microcontroller in the limiter continuously measures the input signal and attenuates the output as much as necessary to keep the maximum sound pressure below a preset value. Because SPL limiters are not peak limiters, the dynamics of the music are not affected. The SPL2TS limits based on the incoming audio at the line input and thus does not use a measuring microphone like the more elaborate models.
Both input sensitivity (threshold) and output attenuation (output-level) can be set on the SPL2TS. All connectors and the controls can be sealed after installation, so they cannot be adjusted afterwards.
The SPL2TS is equipped with a built-in clock. This allows different sound pressure levels to be set for each part of the day. The built-in calendar supports up to 10 dates on which the limiter operates in "bypass" mode. All these settings can be set using the PC software.
Firmware 5.0 update
- Bypass calendar for entering bypass times and dates
- Soft potentiometers for switching off hardware
- Soft range settings dB limits potmeters
- Updated configuration software download via link
- Update available for all existing SPL2TS MK2 models
With timer
Adjustable Threshold and Output
Different levels are time-programmable (control via PC possible)
For sealing
Connections: XLR in / out, mic input
Format: 19" / 1U
Software available to download here: dateq. nl
