Flowdrill Aludrill 5.2 – M6 – 120
Sienas biezums līdz 5.0 mm
S = 5000 apgr. /min
F = 200–400 mm/min
Tikai lietošanai alumīnijā.
Price new was 483 Euro
---
Aludrill 5.2 – M6 – 120
Толщина стенки до 5.0 мм
S = 5000 об/мин
F = 200–400 мм/мин
Только для использования в алюминии.
Version:
Special flow drill with hard carbon coating for production of core holes in aluminium preliminary to thread forming. Coated aluminium profiles can be drilled without separating agent, without the risk of scratching or scorching the paint. The geometry and an extremely smooth surface coating prevent vibration and noise, and material pick-up.
Description:
The high speed and frictional heat creates local high temperatures which plastify all types of metallic materials. This allows a bushing to be created in a variety of thicknesses of materials, without chips, in just a few seconds.
The polygon contour of the carbide flow drill generates frictional heat which plasticises all types of metal materials. This allows closed apertures to be created in a variety of thicknesses of materials, without chips, in just a few seconds.
Advantage:
Large savings of time and costs compared to conventional processes (such as drawn-on nuts).
Generates no chips or swarf; supersedes rivet nuts, weld nuts and press nuts.
Solid basis for threads with high pull-out forces.
For all popular material thicknesses and thread sizes.
